Inspired by the RX-178 Gundam Mark II’s “movable frame” design, the Zeta Gundam was also built around a movable frame capable of transforming the mobile suit into a fighter-like form called a “waverider.” This VMSAWRS (Variable Mobile Suit and WaveRider System) unit not only gave the Zeta Gundam added speed and mobility in waverider mode, but also allowed the Z to make an atmospheric re-entry from space on its own without the aid of ballute packs or other external re-entry systems. Part of the waverider mode’s form was composed of “wing binders” – which had already seen experimental use in another Z Project design, the MSN-00100 Hyaku Shiki – and a “tail binder,” all of which not only served as control surfaces for the waverider in atmospheric flight, but also contained extra thrusters and worked as additional “balancing limbs” in mobile suit mode.
Inspired by the RX-178 Gundam Mark II’s “movable frame” design, the Zeta Gundam was also built around a movable frame capable of transforming the mobile suit into a fighter-like form called a “waverider.” This VMSAWRS (Variable Mobile Suit and WaveRider System) unit not only gave the Zeta Gundam added speed and mobility in waverider mode, but also allowed the Z to make an atmospheric re-entry from space on its own without the aid of ballute packs or other external re-entry systems. Part of the waverider mode’s form was composed of “wing binders” – which had already seen experimental use in another Z Project design, the MSN-00100 Hyaku Shiki – and a “tail binder,” all of which not only served as control surfaces for the waverider in atmospheric flight, but also contained extra thrusters and worked as additional “balancing limbs” in mobile suit mode.
From:傲气英豪:
mahq在Z高达中的阐述：
Inspired by the RX-178 Gundam Mark II’s “movable frame” design, the Zeta Gundam was also built around a movable frame capable of transforming the mobile suit into a fighter-like form called a “waverider.” This VMSAWRS (Variable Mobile Suit and WaveRider System) unit not only gave the Zeta Gundam added speed and mobility in waverider mode, but also allowed the Z to make an atmospheric re-entry from space on its own without the aid of ballute packs or other external re-entry systems. Part of the waverider mode’s form was composed of “wing binders” – which had already seen experimental use in another Z Project design, the MSN-00100 Hyaku Shiki – and a “tail binder,” all of which not only served as control surfaces for the waverider in atmospheric flight, but also contained extra thrusters and worked as additional “balancing limbs” in mobile suit mode.
参考页： http://mahq.net/mecha/gundam/z/msz-006.htm
From:傲气英豪: mahq在Z高达中的阐述： Inspired by the RX-178 Gundam Mark II’s “movable frame” design, the Zeta Gundam was also built around a movable frame capable of transforming the mobile suit into a fighter-like form called a “waverider.” This VMSAWRS (Variable Mobile Suit and WaveRider System) unit not only gave the Zeta Gundam added speed and mobility in waverider mode, but also allowed the Z to make an atmospheric re-entry from space on its own without the aid of ballute packs or other external re-entry systems. Part of the waverider mode’s form was composed of “wing binders” – which had already seen experimental use in another Z Project design, the MSN-00100 Hyaku Shiki – and a “tail binder,” all of which not only served as control surfaces for the waverider in atmospheric flight, but also contained extra thrusters and worked as additional “balancing limbs” in mobile suit mode. 参考页： http://mahq.net/mecha/gundam/z/msz-006.htm
洋芋头
Virtual Mobile Suits Wares？
取名可能来自VMware-ESX-Server
Virtual Mobile Suits Wares？
取名可能来自VMware-ESX-Server
Variable Mobile-suit And Wave-rider system（ヴァリアブル・モビル・スーツ・アンド・ウェイブ・ライダー・システム）の頭文字を取ったもので、大まかな意味としては「モビルスーツとウェイブライダーへの変形機構」となる。
基本的にはアナハイム・エレクトロニクスが開発した可変型MS（特にΖ計画に組み込まれたもの）に付けられる呼称であるが、ここでいう「ウェイブライダー」とは可変機の飛行形態の愛称に過ぎず、本来の意味では使用されていない。
よって”真意”のウェイブライダーに変形するMSZ-006 Ζガンダムのみならず、MSZ-010 ZZガンダムやMSA-0011 Sガンダム、果ては非変形機のFA-010A FAZZなどにもこの名称のロゴマークが使用されている。
Variable Mobile-suit And Wave-rider system（ヴァリアブル・モビル・スーツ・アンド・ウェイブ・ライダー・システム）の頭文字を取ったもので、大まかな意味としては「モビルスーツとウェイブライダーへの変形機構」となる。
基本的にはアナハイム・エレクトロニクスが開発した可変型MS（特にΖ計画に組み込まれたもの）に付けられる呼称であるが、ここでいう「ウェイブライダー」とは可変機の飛行形態の愛称に過ぎず、本来の意味では使用されていない。
よって”真意”のウェイブライダーに変形するMSZ-006 Ζガンダムのみならず、MSZ-010 ZZガンダムやMSA-0011 Sガンダム、果ては非変形機のFA-010A FAZZなどにもこの名称のロゴマークが使用されている。
OK，嗷嗷找到了官方设定！希望对楼主有帮助！![[媚笑]](https://www.aemedia.org/wp-content/themes/yui/smilies/84.gif)
OK，嗷嗷找到了官方设定！希望对楼主有帮助！![[媚笑]](https://www.aemedia.org/wp-content/themes/yui/smilies/84.gif)
原来如此
原来如此
mahq在Z高达中的阐述：
Inspired by the RX-178 Gundam Mark II’s “movable frame” design, the Zeta Gundam was also built around a movable frame capable of transforming the mobile suit into a fighter-like form called a “waverider.” This VMSAWRS (Variable Mobile Suit and WaveRider System) unit not only gave the Zeta Gundam added speed and mobility in waverider mode, but also allowed the Z to make an atmospheric re-entry from space on its own without the aid of ballute packs or other external re-entry systems. Part of the waverider mode’s form was composed of “wing binders” – which had already seen experimental use in another Z Project design, the MSN-00100 Hyaku Shiki – and a “tail binder,” all of which not only served as control surfaces for the waverider in atmospheric flight, but also contained extra thrusters and worked as additional “balancing limbs” in mobile suit mode.
参考页：
http://mahq.net/mecha/gundam/z/msz-006.htm
mahq在Z高达中的阐述：
Inspired by the RX-178 Gundam Mark II’s “movable frame” design, the Zeta Gundam was also built around a movable frame capable of transforming the mobile suit into a fighter-like form called a “waverider.” This VMSAWRS (Variable Mobile Suit and WaveRider System) unit not only gave the Zeta Gundam added speed and mobility in waverider mode, but also allowed the Z to make an atmospheric re-entry from space on its own without the aid of ballute packs or other external re-entry systems. Part of the waverider mode’s form was composed of “wing binders” – which had already seen experimental use in another Z Project design, the MSN-00100 Hyaku Shiki – and a “tail binder,” all of which not only served as control surfaces for the waverider in atmospheric flight, but also contained extra thrusters and worked as additional “balancing limbs” in mobile suit mode.
参考页：
http://mahq.net/mecha/gundam/z/msz-006.htm
因为是Z计划的“ι”（iota）编号机，从Z高达找起就方便多了……
傲气好久不见
那ZZ和S也算WaveRider么？
From:傲气英豪:
mahq在Z高达中的阐述：
Inspired by the RX-178 Gundam Mark II’s “movable frame” design, the Zeta Gundam was also built around a movable frame capable of transforming the mobile suit into a fighter-like form called a “waverider.” This VMSAWRS (Variable Mobile Suit and WaveRider System) unit not only gave the Zeta Gundam added speed and mobility in waverider mode, but also allowed the Z to make an atmospheric re-entry from space on its own without the aid of ballute packs or other external re-entry systems. Part of the waverider mode’s form was composed of “wing binders” – which had already seen experimental use in another Z Project design, the MSN-00100 Hyaku Shiki – and a “tail binder,” all of which not only served as control surfaces for the waverider in atmospheric flight, but also contained extra thrusters and worked as additional “balancing limbs” in mobile suit mode.
参考页：
http://mahq.net/mecha/gundam/z/msz-006.htm
傲气好久不见
那ZZ和S也算WaveRider么？
你查查AE这个VMsAWrs项目都有那些机体不就得了……
我记得坏脑就有
你查查AE这个VMsAWrs项目都有那些机体不就得了……
我记得坏脑就有